Knob-and-Tube Wiring Removal in Medfield, MA

Do you have an older home? Has it been a long time since your last electrical inspection?Medfield Knob and Tube Wiring Removal If so, your home may be host to a severely outdated electrical system that is really holding you back. Older homes, especially those around since before 1950, tend to have dangerously old wiring that poses significant safety risks. 

Knob-and-tube wiring is especially prevalent in older homes. While knob-and-tube wiring used to be cutting-edge technology, this type of wiring has not withstood the test of time. If you suspect you have knob-and-tube wiring in your home, we recommend getting an electrical home safety inspection to see if you need rewiring. If your home needs knob-and-tube wiring removal, Paul Macrina Electrical Contracting can help.

What Is Knob-and-Tube Wiring?

Knob-and-tube wiring is an old-fashioned form of wiring first introduced in the 1880s. This system required ceramic posts that were nailed into the frame of your home. These posts would hold wiring away from the wood. (Not very safe or effective!)

From that location, ceramic tubes would send wiring through or around floor joists. By the 1940s, knob-and-tube wiring was made obsolete by more modern systems. However, as we said, many old Massachusetts homes still have this form of wiring. Paul Macrina Electrical Contracting is on a mission to fix that problem!

The Importance of Knob-and-Tube Wiring Removal

Knob-and-tube wiring is not just an older system that does not work as well as modern systems. It is dangerous wiring and nearly impossible to work with. When knob-and-tube wiring was first implemented, electricians would run hot and neutral wires separately. 

This is important because these wires would take completely different paths throughout the home a lot of the time. For that reason, servicing knob-and-tube systems cannot be done without the original electrical diagram.

Even worse, knob-and-tube systems do not include a ground wire, and the enameled cloth surrounding these wires is especially flammable. In many cases, the original insulation is so old that all that remains is bare wiring left completely exposed. That may sound bad enough, but it might even be worse. Your old wiring may have been modified over time.

Dangerous Modifications

Paul Macrina Electrical Contracting finds that homes that resisted updating their electrical system tended to rely on risky DIY modifications to keep up. Some homes would have extension cords replacing sections of bad wire, lamp cords spliced into old wiring, or electrical tape wrapped around swaths of frayed wires. 

Then, some homes wrap their old wiring in modern insulation. Modern insulation may sound like a good thing. However, modern wiring is designed for a lower amperage than knob-and-tube wiring. The comparatively higher amperage of knob-and-tube wiring builds much more heat in the wires. With no way to effectively dissipate heat, modern insulation serves as kindling for an impending electrical fire

Other modifications include installing larger fuses and larger electrical panels and loading knob-and-tube wiring systems beyond their capacity. These temporary fixes may work for now, but electrical fire is inevitable with so much power ripping through such old wires. 

With Paul Macrina Electrical Contracting’s knob-and-tube wiring removal service, you can eliminate all of the dangers posed by this outdated system. 

How to Know If You Have Knob-and-Tube Wiring

Knob-and-tube wiring is most common in homes built between the early 1800s to the early 1950s. This was when knob-and-tube wiring was cutting-edge technology. If you’re not sure exactly when your home was built, you can take a look at unfinished sections of your home where the inside of the wall may be exposed. Here, you are most likely to spot knob-and-tube wiring. Your attic and basement will be the best spots to check.

Knob-and-tube wiring may be running under the insulation in your attic, in which case you will need to remove some insulation to get a view of the underside. In your basement, the most accessible area to search is the boards above you. In either case, if you have knob-and-tube wiring, you will find the telltale ceramic pieces jutting from the joists. 

Of course, the best way to confirm whether or not you have knob-and-tube wiring is to schedule an electrical home safety inspection. If you have knob-and-tube wiring, your first instinct might be to scour the internet for an “electrician near me.” Don’t worry. Paul Macrina Electrical Contracting is here to help you remove your knob-and-tube wiring immediately.

How to Remove Knob-and-Tube Wiring from your Medfield, MA, Home

The best method of knob-and-tube wiring removal is to consult with a professional electrician. Paul Macrina Electrical Contracting will thoroughly inspect and rewire to eliminate all of the risks and dangers of knob-and-tube wiring. Once we are finished removing your knob-and-tube wiring, Paul Macrina Electrical Contracting will rewire your home to use a modern electrical system.

Because this is a complicated and potentially dangerous process, we do not recommend attempting to remove knob-and-tube wiring on your own. This is a complex undertaking, best left to the expert electricians at Paul Macrina Electrical Contracting.

The Benefits of Rewiring

Rewiring may seem like a daunting process, but the project is well worth it. Our customers at Paul Macrina Electrical Contracting can attest to that!

Knob-and-tube wiring removal includes more benefits than a vastly reduced risk of an electrical fire. You can enjoy more freedom to use more appliances, modern outlets, and proper home insurance. Here are all of the benefits you will enjoy after rewiring your home with Paul Macrina Electrical Contracting.

Increased Capacity

After our knob-and-tube wiring removal process, your home will be rewired with a modern electrical system. This will give you dramatically increased capacity, allowing you to run more appliances and devices simultaneously. Best of all, you can do so safely. Even with modified knob-and-tube wiring systems, you will not be able to reliably run modern technology on the scale of the average home without the lights going out.

Better Value

Older homes with knob-and-tube wiring are held back by their outdated electrical systems. When Paul Macrina Electrical Contracting removes knob-and-tube from your home and replaces it with a modern system, you can expect the value of your home to increase. 

Solar Capability

When Paul Macrina Electrical Contracting installs a modern electrical system in your home, it opens you to alternative power options. Sometime in the future, you could safely add solar panels to your home to supplement your power needs. This is an excellent way of saving money over time, as well as reducing your carbon footprint.

Improved Safety

Removing knob-and-tube wiring is already a step in a safer direction, but modern wiring opens your home up to more opportunities for safety. You can upgrade your outlets to GFCI outlets and upgrade your electrical panel to a more powerful panel that can accommodate more devices.

Even better, with knob-and-tube wiring removed from your home, insurance companies will be more willing to cover your home. Typically, most insurance providers avoid covering homes that are known to have knob-and-tube wiring. Paul Macrina Electrical Contracting understands all the ins and outs of that process. Let us help you get your home in the right shape!

Protect Your Home from Knob-and-Tube Wiring with Paul Macrina Electrical Contracting

Paul Macrina Electrical Contracting has been servicing Medfield, MA, for over 30 years, with a dedication to reliable, quality work. Our electricians are experienced and highly trained, ready to face any electrical challenge your home may present. 

If your home in Medfield, MA, needs knob-and-tube wiring removal, Paul Macrina Electrical Contracting will quickly and effectively rewire your home to bring it up to modern standards. Call or contact us to book your appointment today!